End Effectors

Round bar End effector pneumatic, max 30 kg.
Part.no: 1 015 204 010

Round bar End effector pneumatic, max 30 kg.
Rotated 90 deg. Part.no: 1 015 204 011

Round bar End effector pneumatic, max 45 kg.
Part.no: 1 015 205 010

Round bar End effector pneumatic, max 45 kg.
Rotated 90 deg. Part.no: 1 015 205 011

Max. 30 kg for 1 015 204 010 and 1 015 204 011
Note: Maximum lifting capacity is 30 kg when lifting in COG. The lifting capacity varies depending lifting object shape and gripping position.

Max. 45 kg for 1 015 205 010 and 1 015 205 011
Note: Maximum lifting capacity is 45 kg when lifting in COG. The lifting capacity varies depending lifting object shape and gripping position.

For lifting objects 0-90°C.

2x safety has to be applied on each lifting object.

Safety function thanks to an integrated metal sensor that prevent lifting if not correct gripped - Stop-up

Working load limit 15 kg

9 kg

For lifting objects -40° - +65°C

Clean dry air, filtered, pressure 6-8 bar

2x safety has to be tested on each lifting object.
Built in blow off function.
Note: In case of loss of compressed air, the lifting object will drop.

The Versatile Vacuum end effector is equipped with adaptable foam that forms according to the lifting surface.
It can handle lifting object with uneven surfaces as well as different sizes.

For normal use on flat, dense and not greasy
materials. Recommended vacuum level at 60 kPa.
Horizontal - Max. 85 kg
Vertical - Max. 60 kg

For lifting objects with temperature 0-90°C

9 kg / 20 lbs

Clean dry air, filtered, pressure 6.0-8.0 bar is required

2x safety has to be tested on each lifting object
With built-in-blow-off function, atmospheric pressure function and warning for insufficient vacuum.

The Vacuum end effector is actuated by the lower buttons on the handle. Handle with vacuum ejector and mechanical swivel is included.
No Quick-Lift Arm or Rail system is included

Quick-coupling, Quick-coupling pin and flange for connecting end effector to Quick-Lift control unit.

For more options see document: Options

Maximum lifting capacity varies depending on the shape of the object to be lifted.
Note: The lifting capacity is reduced when the center of gravity of the object to be lifted is eccentric.

Sheet metal thickness from 3 to 25mm, max 110kg.

Round steel parts from ø25 to 120mm, max 110kg

Clean dry air, filtered.
Pressure 6,0 -8,0 bar is required

Maximum lifting capacity varies depending on the shape of the object to be lifted.
Note: The lifting capacity is reduced when the center of gravity of the object to be lifted is eccentric.

Thickness 20 mm 270 kg
Thickness 15 mm 210 kg
Thickness 10 mm 150 kg

Note that magnetism under the steel plates <25 mm can occur.

Ø 60-250 mm,
Maximum length 1500 mm
Maximum weight 135 kg

Maximum temperature of lifting object 50° C.

21 kg / 46 lbs

Clean dry air, filtered, pressure 6.0 -8.0 bar is required

For each lifting manovering, the control unit performs 3 internal security tests before the load can be lifted or handled. Are a quick and easy process, which do not disturb the operator's productivity

The tiltable magnetic gripper is operated with the lower buttons on the handle. Handle with 5/2 pneumatic valve and swivel included.

Max. 300 kg / 600 lbs

Safety Class 8

0,6 kg / 1,3 lbs

To be used when it is required that the hook have a fixed installation to the handle.
Note: Minimum 10 full threads are required

For available options, see document:
Options

Max. 300 kg / 600 lbs

Safety Class 8

0.5 kg / 1.1 lbs

- Quick-coupling.

For more options see document: Options

Max. 300 kg / 600 lbs

1.3 kg / 2.9 lbs

Applicable on Quick-Lift Control handle for mechanical end effectors, Control handle with pneumatic 5/2 valve and Control handle with vacuum ejector.

For more information see document: Options

- Quick-coupling pin.

For more options see document: Options

Max. 300 kg / 600 lbs

Safety Class 8

0,5 kg / 1,1 lbs

- Quick-coupling.

For more options see document: Options